Best Engine Oil Vacuum Extractor: Recommended for 2021 (Updated Guide!)

You need to take care of your car. The car will not work well unless you change the oil regularly. When you don’t change the oil, it breaks down and can’t lubricate or heat the engine space, which will make it work badly.

To avoid this, we visit the garage to get rid of our old oil. What we don’t know is that this step doesn’t always require a professional. We can use the best oil extractor to do it at home for free.

You will need the best engine oil vacuum extractor for this. You might need to know how an oil extractor works and how you can empty it. All of that information is here.

Are You In Hurry? Then Check Out Below!

If you don’t have a lot of time to read this whole article, here are the top 3 best engine oil vacuum extractors.

If you do not want this, I will give you a guide that helps you choose the best engine oil vacuum extractor. This part will tell you all the things that should be checked.

Buying Guide Before Purchasing Best Engine Oil Vacuum Extractor

When buying an oil extractors, there are some things that you should look for. These features will help you have a better experience with the oil extractor by making it work better.

  • Portability

A compact, light oil extractor will let you carry it anywhere. You could store the tool in your car and take it out when it is needed for extraction. Think about how much the unit weighs and its size before buying one.

Big oil extractors might be good for traveling, but they might not be the best kind for a lot of oil. Get one that is medium-sized and has a reservoir size of reasonable size.

  • Convenience

Some oil extractor automatically suck the oil in when you dip them into the stick. Other ones need a pump to let the oil in. Choose an easy-to-use one that is also easy to maintain.

If you want a clean and easy way to extract oil, get an extractor that has a container attached. This will allow the oil to flow into the container automatically. You can then pour the oil into a final storage or recycling container.

  • Speed

Your oil extractor’s speed does not affect how well it works. But if you use an oil extractor that is faster, then your job will be done sooner.

You need tools with a large tube if you want to get oil out of an engine faster. But sometimes the nozzle is too wide and it will not fit in the engine hole. So make sure that your tools have a wider nozzle so you can get this done faster.

  • Material

Oil extractors are not things you need to replace often. You will keep them for a long time. So getting high-quality extractors will make sure the tool lasts longer.

Try to find a high-quality and thick plastic oil extractor. This way, no matter how many times you wash the surface or rub the surface with alcohol, there will be no wear on it.

You can also use metal extractors. They are not as easy to spill, and they last a long time. But be careful because they are heavier than plastic ones.

  • Container Size

Most good-quality oil extractors come with a container attached. It will catch the oil. When it is full, you can take it away, and get more.

Top 12 Best Engine Oil Vacuum Extractor – Reviews

There are many best oil extractor in the market. They all claim to be the best. So it can be hard to choose which one is really best. That is why we have made a list of twelve that are really good.

1. OEM TOOLS 24389 Manual, 5.3 Liter Extractor (best oil extractors)

OEMTOOLS 24389 Manual Fluid Extractor - 1.4 Gallons (5.3L), Car and Boat Oil Change Extractor Pump, Coolant Evacuator, Transmission Vacuum Pump
CAREFREE CAR AND BOAT CARE: This versatile fluid evacuator pump allows for the easy removal of engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more
EASY OIL CHANGE: No more crawling under cars for oil changes; This topside oil extractor pump pulls oil from the dipstick, allowing you to stay right side up the whole time

Do you need the best oil extractor? This oil extractor is light and compact so it can carry a lot of oil.

This container has a 5.3-liter reservoir and will hold a lot of oil, so you will not need to empty it often. The container is made of top-quality plastic and can still stay strong even after regular use. Plastic oil extractors are good for travelers because they are lightweight but also durable.

The valve has a shut off feature. This is good, because it keeps oil from spilling. It is also good that the valve is one piece and only attaches to one thing, because this keeps spills from happening as well.

This extractor has a long and skinny flex pipe that is 5 feet long. You also get two adapters that let you attach the pipe directly to the dipstick. A simple and smooth hand pump helps you remove all of the oil without hurting your hand.

This type of tool can be used on many different types of engines. It is good for cars, boats, and other machines. It can even take out fluids that are not thick or heavy like water or coolant.

  • Lightweight and compact
  • Made with sturdy plastic; long-lasting product
  • 5.3-liter reservoir
  • 5 feet of flex pipe and two adapters included
  • Simple hand pump method
  • Easily extracts low viscous fluids
  • Not the fastest extractor

2. Hydro-Turf Oil Extractor 6-Liter OIL01 – (best oil extractor)

Best Engine Oil Vacuum Extractor

Most of the time, oil extractors do not have a great way to empty it. With a special pour, spout included you will not have to worry about spilling the oil everywhere when you go on and try to empty your oil extractor.

This spout lets you pour the oil into storage or recycle containers in seconds. There is no mess, so you don’t have to clean up.

This pump is great for people who have wrist or joint pain. Load the easy-to-use pump with 6 liters of oil and then push it out into a container.

If you are concerned about storage, this is the extractor for you. A removable pump lets you take it apart so it can fit in any space.

You need to warm the oil in your engine before you start. After that, just stick the pipes in and then pump. You will be able to get all of the oil out of your engine after a few minutes. This is because physics are simple- not hard at all!

  • Can be used on snowmobiles, cars, motorcycles and any kind of machinery
  • Spout included for easy emptying of the oil extractor’s reservoir
  • Spill and leak proof
  • 6-liter oil chamber
  • The tube can be separated from construction for better storage
  • Simple and easy to use
  • Tubes are only 3 mm in diameter
  • Slow speed
  • Oil needs to be warmed up before

3. Briggs & Stratton 5430K Oil Extractor Pump, 1.6-Liter

Best Engine Oil Vacuum Extractor

This best oil extractor is not the largest, but it is still pretty good. It has a 1.6-liter oil storage container, so you can store it easily in your suitcase. This size is great if you want to take an extractor with you on vacation and use it while you are there.

This extractor is made of a strong plastic that will not wear off. You can clean the tool with rubbing alcohol, or by using warm water. There is no special maintenance needed for this product, except to use it and then clean it after use.

The extractor is easy to use. First, you use the long tube to stick into the dipstick until you reach the end. Then, you pump it and all of the oil comes out. You will not have to wait too long for your oil to come out after that.

You can find out if a tube is compatible with your engine or machine by entering the model number online. This will help you buy a tube that fits.

  • Weighs just 1.3 pounds
  • Easy to travel with and store
  • Made with sturdy plastic
  • Can be easily cleaned with alcohol or warm water
  • Basic instructions; easy to use
  • Compatibility can be checked on their site before purchase
  • Small oil storage container
  • Contains too many detachable parts, might cause leaking

4. CISNO 12V 60W Vacuum Transfer Pump Extractor 

Best Engine Oil Vacuum Extractor

If you do not like to extract oil manually with a basic oil extractor, you may want to try out a different kind of electric extractor (like this one).

All you need to do is connect the pump and power. Connect the inlet pipe to the bottom of the joint with no movement. Connect the outlet pipe with no movement. The extractor should start pumping oil out then.

After you are done with the process, you can run the extractor for a few more minutes so that the remaining oil in the tube gets into the reservoir.

This is a tool that will help you get rid of all the oil with ease. There is enough space in the reservoir to store up to 5 liters of oil, but it’s not too big so you can carry it around with you.

This extractor runs on 60W and 12V. If you want, you can connect it to AC power with the help of a converter.

  • No stress on hands; electric pumping
  • Easy to connect
  • Has a maximum flow speed of 5 liters/minute
  • Stores up to 5 liters of oil
  • Compact in size
  • Weighs 1.85 pounds
  • Can be connected to an AC supply
  • If not used regularly suction might stop working

5. Mityvac 7201 Fluid Evacuator Plus

Best Engine Oil Vacuum Extractor

This is one of the most convenient oil extractors. It is big, with an 8-liter storage reservoir. This extractor can also pump liquids of any viscosity – it can be used on engines, industrial machinery, snowmobiles, tractors and many other devices.

A manual unit like this can be used for many purposes. This one is easy to use and clean, and you will need it if you change your oil often. You can use high-pressure water or alcohol to clean it off, whichever works best for what you need. Just remember to dry the extractor after washing with water or alcohol

This is plastic. It’s strong and does not rust or break. The material is waterproof so it will never leak. This has an automatic switch that turns off the oil when it reaches 8 liters, so you don’t make a mess.

You don’t need to keep on pumping this for the whole time. Pump it 10 times and the tool will do the rest. If you don’t check up on it, nothing will happen because when there is too much water, the tool stops the valve.

  • 8-liter storage compartment
  • Can be used to extract any kind of fluid
  • Durable polyethylene structure
  • No rust, no corrosion
  • Valves close automatically to stop an overflow
  • Needs to be pumped only 10 times and the tool does the rest of the extraction
  • Some users found the tube to be a bit short

6. Air Power America 5060ts Topsider Multi-Purpose (best fluid extractor)

Best Engine Oil Vacuum Extractor

If you are using a container that does not have a stable base, it will spill oil. So you should get this container from air power america 5060ts that has a 12-inch diameter base. This helps keep the container still and stable even when it is empty, so there are no spills.

A convenient-to-use and strategically placed drain plug give you the capability to store pumped out or used old oil safely without making a mess. The 7.5-liter reservoir is big enough to be able to store large quantities of oil before needing a draining but compact enough to be easily stored and traveled with.

The construction of this extractor is not too hard. It has few parts, so it will not leak.

This vacuum pressure device does not need electricity. You can take it anywhere because there are no plugs. All you have to do is put the tube down the dipstick and then it starts making suction power.

This extractor is made with steel. The steel will not rust or corrode when you use water to clean it.

  • The 12-inch base makes the extractor stable
  • Not too many detachable parts; extractor is leak proof
  • Strategically placed drain plug for easy cleanout
  • 7.5-liter big oil storage container
  • No electricity needed
  • Steel body
  • Rust resistant
  • Needs to be pumped continuously although instructions state otherwise

7. Qiilu 12V 60W Oil/Diesel Fluid ( best oil extractor pump )

Best Engine Oil Vacuum Extractor

Some people don’t want to buy an electric oil extractor because they need a power source. But this electric extractor won’t need one because it will work when connected to your car battery. Now you can take an electric oil extractor with you when you travel!

Once you figure out how and where to place the tubes, you will be able to use this extractor with ease. Connect the extractor with your car battery and let the pump do its magic. Give your hands a rest, no manual labor is needed.

An on/off switch controls the flow of oil. You can use this machine to pump or change any liquid, like oil or diesel, from any kind of engine.

This extractor is made of a mixture of plastic and aluminum. It will last a long time and you won’t need to buy one of these again for a while.

If you flow 5 liters of oil through the engine every minute and 250 liters of diesel per hour, then your engine will be clean in no time.

  • Motor oil flow rate of 1 liter/minute
  • A diesel flow rate of 250 liters/hour
  • Made with plastic and aluminum
  • Easy to keep clean
  • Leakproof and mess-free design
  • Can be run with the help of a car battery
  • No manual labor needed
  • If not used regularly suction might stop working

8. EWK 6.5L Oil Extractor Pump Pneumatic Fluid Evacuator 

Best Engine Oil Vacuum Extractor

If you have an extractor, it is good to know that you can use it in both manual and pneumatic mode.

According to your situation, you can use the pneumatic mode to pump out oil without using much hand power. You can also use the manual mode when there is no other equipment around.

This tool is one of the best ones to buy. When you are on vacation, you can use the power extractor without needing an electric source. But when you are at home, you can use the pneumatic mode and change the oil in minutes.

This tool can extract oil from a 4 cylinder car in 5 minutes. It has 2 extra tubes to make the process go faster. The tubes are different sizes so they can get to the bottom of your oil pan easily.

This one is also easy to keep clean. You won’t make a mess when you pour out the oil.

  • Speed of 1.6 liters/minute
  • Can empty a 4 cylinder car in 5 minutes
  • 2 extra tubes
  • Tubes are of different diameter that can be used to increase speed
  • Can be used both manually and in the pneumatic mode
  • Hoses wear out quite soon

9. EWK 15L Oil Changer Fluid Vacuum Extractor Oil Removable pump

Best Engine Oil Vacuum Extractor

When you want to extract something from oil, heating the oil can make it easier. When the temperature is higher, the liquid will come out easily without leaving much inside.

This best oil extractor from EWK is not like some other ones. It does not melt off or get disfigured because of the heat. This extractor can handle liquid that is up to 200 degrees F without a single scratch or hole.

Made of polypropylene, this extractor can be cleaned with water or soap. It has a 15-liter liquid capacity. It is the best for cars or trucks that are bigger than average.

The reservoir is big, so it is hard to pour the oil out of it into another storage or recycling container. To solve the problem of spilling oil, a special spout was created. This spout prevents any oil from leaking while being extracted.

You can use this extractor as a brake bleeder. You have extra hose with a valve that prevents oil from going back into the tank.

  • Can withstand up to 200 degrees F
  • Does not melt or deform
  • Made with polypropylene; won’t rust
  • 15-liter reservoir, perfect for large engines
  • The spout comes with a safety lock
  • Can be used as a brake bleeder
  • Hard to find replacement hose for the extractor

10. Performance Tool W54170 12V Oil Extraction Pump 

Best Engine Oil Vacuum Extractor

Changing the oil can be frustrating, especially because it takes some time. But this tool is perfect if you hate waiting for the tank to empty out and don’t like manual oil extractor.

When you use this pump, it will suck up all the oil in your tank. The suction is fast and the diameter of the hose is well adjusted. It will take 2.8 liters of oil per minute with this pump.

The long hose will be able to reach all the way to the end of your tank that is furthest away. You want to make sure you connect the wires correctly. The tool needs time for it to get warm before you use it. Also, make sure that when you are pumping, it is self-priming.

It is now easier to get the oil out of the thing. There is a hose that is connected to the tool so you can pump it into another place. It weighs less than 2 pounds and does not take up much space.

  • 1400 RPM allows a fast extraction
  • Can be directly poured from an oil tank to the final storage container
  • Easy to connect and operate
  • 2.8 liters of oil out per minute
  • 12V 5 amp DC pump
  • Weighs only 2.1 pounds, compact
  • Squeeze bulb leaks sometimes

11. EXtoil 6-Liter Oil Extractor with Vacuum Gauge

Manual extractor can last a long time. They are not easy to use because you must do the work yourself. If you have sore wrists or weaker arms, it might be hard to use this tool.

This extractor is both durable and easy to use. It has a gauge on top so you can see when it’s low and needs more oil. You need to pump the handle up and down when you see the pointer in the reading.

The pump comes in an extra-long size for travel. With just one or two strokes, the oil will start flowing in automatically.

The built-in suction gauge makes the extraction process easier. This extractor comes with a foot pedal, which is for your convenience.

The 6-liter extractor can be used on any kind of fluid. The extractor is well known for working great with SUVs, trucks, car engines, and many industrial machines too.

A sealed tube holder is the best way to keep your work clean. The extractor helps you clean up afterwards.

  • Comes with a foot pedal
  • Sealed tube holder
  • Spout for easy pouring
  • 6-liter oil holding capacity
  • Requires the least amount of pumping
  • Gauge guides you on when to pump
  • Extra-long travel size pump handle
  • The glue that holds the hose together with the extractor is not the strongest

12. YaeTek Excellent 12v Motor Oil Diesel Extractor

This YaeTek motor-oils extractor helps you change the oil in your car. The oil that you use is not always diesel, but this machine can still help pump it out of your car. This machine will change the oil for you very quickly.

This pump is strong. It runs on 12 volts and can get all the oil out quite fast. When people use this pump, it gets 250 liters of fuel every hour.

This thin dipstick tube is easy to use. You can slide it into any engine. The tube is long, so you don’t need to reach the end of the tank for this to work. This makes it less messy and there’s no oil spill too.

Oil extractors that do not need to be pumped by hand are great. There is no sound so you can use it in your home.

  • No pumping required
  • Compact in size, weighs 2.2 pounds
  • Thin dipstick tube slides into any kind of engine
  • Long tube reaches the end of a tank
  • Powerful 12V 5amp DC motor
  • Compact and lightweight
  • 250 liter/hour flow rate
  • Can get diesel and motor oil out easily
  • Cannot be used for petrol, paraffin or any highly flammable oil
  • Can be used only with warmed up oil

How Does an Oil Extractor Work? 

This tool will help you get the oil out of the ground. You don’t need to worry about getting your hands sticky.

An oil extractor comes with a tall and thin tube attached to a container. The tube can reach the very end of the chamber, so you can suck as much oil as possible.

Put the tube in the dipstick hole. Then, the tube will vacuum up all of the oil. The oil is safe in the container and there is no leakage or spilling. So, You won’t have to clean up anything after the party.

Oil extractors come with a spout design. This is one of the cleanest ways to change oil. When you suck out the oil, it goes into a separate container.

This car lifting mechanism is easy to use. You won’t have to go to the mechanic because you can do this by yourself. There are no batteries or charging involved, so you won’t have any worries about replacing the extractor.

How to Empty an Oil Extractor?

When you vacuum the oil, it goes into a container. Then you clean the machine and leave it for next time. It is easy because there are no complex parts to it and the machines work with simple mechanics.

  • Drain the Extractor

The first thing you need to do is empty the oil extractor. First, place the extractor near a surface that slopes so that gravity can help and then let it drain.

Oil is expensive. If you have too much, pour it out. It will be easier if you have an oil extractor with a valve that drains the oil into your recycling container or any other container of your choice.

  • Clean the Extractor

After the oil has been removed from the extractor, you will have to clean it out. This includes both the inside and outside.

To clean a car, start with a wet cloth. Then rub the entire car. This will help get rid of anything that is stuck to your car even if you don’t have hot water – but this is not the most effective way.

  • Use Air Blower to Dry the Oil Extractor

After cleaning, make sure you dry out the extractor. You can use an air blower to do this.


Do engine oil extractors work??

Yes, they do. A lot of people use these tools to get all the oil out quickly and easily. There are a few different ways you can go about this process too depending on your needs and preferences! It is best if you have an extractor that pumps itself but it still works with hand pumping too so no matter what kind of extractor you have, it will still do a good job!

How much does an oil extractor cost?

Oil extractors can cost around $30 up to about $100 for the best machines. It depends on what kind of machine you want and how powerful it is too so that makes sense as there are different types with more or less features too.

Is an oil extractor easy to use?

Yes, it is! For best results, you should definitely read the manual before using your machine but in general, they only require a little bit of preparation, and then once that’s done all you need to do is put the tube into the dipstick hole and let it suck up all the oil out of the tank!

What kind and brand should I get?

There are multiple options available for you to choose from. Some best ones include Oil Extractor With Hose, PUMP-IT 2620 Vacuum Pump & Lifter Portable Car Engine Oil Drainage Tool (12v) – Suction Power 250L/Min, Vacuum Pump And Lifter Portable Oil Drainage Tool – Suction Power 200L/Min and more!

Does it work for all cars?

Yes, most of them are made to be compatible with many different types of vehicles that have a motor. So you just need to find the best fit for your car! Which is definitely best if you read the manual too.

Can you drain oil from the dipstick hole?

Yes, that is the best place to extract oil from! However, it depends on your particular car because some engines are different.

What kind of machine should you get?

You can choose based on what features best fit your needs and preferences best so pick something that sounds good for you or if you have any questions, just ask us here at best vacuum cleaner reviews!

Final Words

To make your engine last longer, change the oil. This is important because it keeps your engine’s parts working well. You can do this by buying an oil extractor at a store that you can then use to take care of this at home.

Leave a Comment